Acoustical Outlet Backer Putty Pad for Soundproofing Walls. These pads are easily applied over standard outlet boxes for a secure acoustical seal.
7" x 7.25" x 1/8" thick, with Intumescent Fire Stopping Properties, for safety.
Joist Gasketing Comfort and Silence Tape is applied to floor joists to damp impact sound and eliminate floor squeaks. They can also be used on wall and ceiling joists to enhance sound control.
Pre-cut to standard joist widths in new construction - Available in 1-1/4", 1-7/16", 2-1/4" and 3" Widths.
SOLD BY THE ROLL: 100’ Long Per Roll
Resilmat - RMI is a recycled rubber wall underlayment that provides a continuous resilient support under floor and ceiling sill plates. Can be used with a wide range of loadings to contribute up to 9 LEED credits. Available in a choice of 5mm and 10mm thicknesses.
The Electric Box Seal is a specially molded fire resistant neoprene seal for outlet boxes. It is a gasket that fills the gaps between the cover plate (not included) and the wall surface to seal a common weak point in sound and air flow and significantly improves the STC performance of the outlet and recepticle.
Color: Supplied in beige and available in many standard designs. Select from options below.
*Important Note Regarding Duplex Designs: Designs marked with an * are NOT compatible with Cooper Wall Plates. They will fit all other standardized NEMA devices. For Cooper Duplex Receptacles an alternate design can be purchased through our office. A minimum purchase will be required.
TMS Extreme Hold Adhesive is a high performance polymer specially designed for adhering Acoustical Panels to walls and ceiling. Also works great at sealing and adhering the edges of Mass Loaded Vinyl. Additionally this adhesive has excellent adhesion to PVC, Plastics, vinyl, rubber aluminum, steel, glass, concrete, marble, brick and wood. Meets ASTM-C920 and G26 - 10.1 Fl. Oz per tube. Sold in packs of 2,6 and 12 tubes.
The RSIC-AMI (Acoustical Mullion Isolator) decouples the acoustical mullion section from the main mullion section stopping the noise transfer from unit to unit. The RSIC-AMI is one part of the total isolation system with an STC 58 when paired with a wall that has an STC equal to or greater than 58. ete the fill of the mullion section. Caulking or gaskets are used to fill the space between the glass and the acoustical mullion, and the gypsum board and acoustical mullion.
Mass Loaded Vinyl Nails are the preferred method for installing MLV on wood surfaces in wall and ceiling applications. Designed with a wide washer head which spreads the weight of the MLV to prevent tearing that generally occurs with standard screws. Sold in packs of 50 nails for a coverage of 50 square feet of Mass Loaded Vinyl.
Easily prep your door for mortised automatic door bottom with this router bit, which has been tested to work for our regular duty and heavy duty automatic door bottom, in stock, ready to ship.
Quart Size Caulking Gun for applying Green Glue Noiseproofing Compound and Green Glue Acoustical Sealant Tubes.
Caulking gun ensures simply and neat application.
The FF109-200 is a low-profile, LED Recessed Light Cover made from flexible material to enable simple installation. Designed to maintain the integrity of openings of up to 6” diameter in fire-rated ceilings. Enhances the acoustic protection of ceilings when penetrated by modern LED downlight fixtures.
PRICED PER PIECE
Light and Speaker Covers are designed to stop air and sound leakage through recessed lighting. They are UL tested and approved for use with IC-rated recessed incandescent, fluorescent or LED light fixtures as well as all types of speakers.
Light and Speaker Covers are designed to stop air and sound leakage through recessed fixtures. They are UL tested and approved for use with IC-rated recessed incandescent, fluorescent or LED light fixtures as well as all recessed speaker systems.
High Quality EPDM Rubber Joist Isolators and Floor Floaters made in the USA. Support and acoustically isolate floor framing members, to lessen the sound waves passing from one side of the structure to the other. U Boats are sized to fit standard 2" thick joists.
High quality surface mounted LED light (4" or 6"). These lights will give you a similar look to fully recessed lights while allowing you to mount them to a standard junction box which can easily be sound controlled with the use of an acoustical putty pad.
12W Dimmable - 120V, 840 Lumens, 90CRI, 3000K, 36,000 hrs.
Tenmat FF130 Troffer Covers are designed to stop air and sound leakage through recessed lighting. They are UL Classified to maintain the fire rating (1 hour) in many fire rated assemblies.
Available in two size options 2'X2' and 2'X4', see Product Data Tab for more information.
Vibration damping foil tape with polymer adhesive used to reduce vibration and noise in a wide variety of applications. Handles temperatures from -25°F to 175°F. Discounts apply when ordering multiple rolls.
SOLD PER ROLL - 2" x 36 YARDS
Free Shipping! See Shipping and Returns Tab below for additional information.
The gaps between door / window frames and framing (molding) is a common area for sound leakage. This can be easily remedied by applying our Sponge Neoprene Soundproofing Rubber Strip. Available with PSA self-adhesive backing for easy installation.
SOLD BY THE FOOT. Adjust 'Quantity' to the number of feet required.
Bulk Caulking Gun is compatible for use with our 5 Gallon Buckets of Green Glue Noiseproofing Compound.
Bulk Caulking gun is easy to apply and ensures simple and neat application. When barrel is full it contains approximately one tube of Green Glue (29 oz.).
RC1 One Leg Resilient Channels is a low-cost decoupling method used on steel or wooden framed ceilings and walls to separate the structure from drywall, effectively reducing sound transmission. Length of each channel measures 8.6' (102").
PRICED PER 32 PIECE BUNDLE
FREE SHIPPING! See Shipping and Returns Tab below for additional information.
TEMPORARY SHIPPING NOTE: SHIPPING IS CURRENTLY UP TO 2 WEEKS FOR RC-1 CHANNELS