Recessed Light and Speaker Cover 15"x11" - Fire-Rated

Recessed Light and Speaker Cover 15"x11" - Fire-Rated

Light and Speaker Covers are designed to stop air and sound leakage through recessed fixtures. They are UL tested and approved for use with IC-rated recessed incandescent, fluorescent or LED light fixtures as well as all recessed speaker systems.

Price: $79.00
Qty
Save to wishlist
SKU TCS-FF109350
Description

FF109-350 Fire-Rated Light and Speaker Covers

  • Applications: FF109-350 are the only flexible recessed light enclosures designed to protect light fixtures from insulation in the attic and to stop air and sound leakage through recessed lighting. It is versatile and can be used to protect recessed speakers as well. They offer significant energy savings as well as noise and draft reduction.
     
  • Design: FF109-350 light covers are dome shaped intumescent barriers made of durable, thermal insulating mineral wool. Made of flexible, lightweight and fire-safe material which is suited for a wide range of recessed light fixtures. The FF109350 is the larger version of the FF109-300 and suitable for lights up to 8".  
  • Dimensions:     Inside height: 11"
                           Diameter: 15"
                           Approximate Weight: 2.5 Lbs. 
                           For smaller light fixtures see our FF109-300 Light Cover.
     

 

  • Acoustic properties: Product is designed to completely cover fixtures and exhibit excellent acoustic insulating properties. They significantly reduce the amount of noise travelling through air gaps around light fixtures.
     
  • Fire Protection: In a fire, the intumescent material expands 5 times of its original thickness, closing the vent holes and preventing flame spread. Two vent holes in the cover reduce the risk of over-heating of the light in normal use. The high expansion and insulation properties ensure that flame spread and heat transmission are stopped for 60 minutes. Also available through our office with a two hour fire-rating, to order please contact us or call our office at 845-388-1200. 
     
  • Installation: Product does not require assembly or special tools and can be installed within seconds. The flexible material enables the cover to be fitted around obstructions or retro-fitted. The light cover does not require maintenance but is easy to remove for fixture maintenance.
     
  • Certifications: Warnock Hersey - Intertek certified to maintain the fire rating (1 hour) or fire-rated floo/ceiling assemblies. Tested to ASTM E119, UBC 71, NFPA 251, ASI A2.1.
  • Priced Per Piece
Product Data

Printable Documents:

Click to print Product Data for Tenmat 109-350 Light and Speaker Cover.
Click to print Tenmat FF109-350 Light Cover UL USA Certification

Dimensions:

Tenmat 109-350 Light Cover DimensionsTenmat 109-300 Dimensions

Specifications:

Tenmat 109-350 Light Cover Specifications

Installation Guide

Printable Documents:

Click to print Tenmat FF109-350 Light Cover Installation Instructions.

Step 1:

Hanger bars of the light fixture shall be screwed to the joists in addition to the tabs being hammered into the joists, following the light manufacturer's installation instruction.

Step 2:

Place Tenmat FF109 cover over the fixture. Slit the cover to fit over the hanger bars of the fixture. Cut four slits with a size up to 1" max.

Step 3:

The wire can be fed through one of the cover vent holes located at the top. Follow the light manufacturer instructions to make proper connections.

Step 4:

Put the cover on top of the fixture. Check for secure fit and make sure the cover overhangs the hanger bars. The FF 109 Light Cover must fit flush with the back surface of the drywall board.

Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING for orders over $300.00 in the USA (excluding Alaska and Hawaii). A flat fee of $19.99 will be applied to orders under $300.00.
    • If order qualifies for free shipping, the shipping cost will need to be covered in the event of a return, see below.
    • Ships via major carriers, such as UPS or FedEx Ground, with tracking information provided.
    Returns:
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
 
Reviews
Recently Viewed
Q&A