Foamtak Spray Adhesive

Foamtak Spray Adhesive

Foamtak Acoustic Foam Spray Adhesive for easy temporary and permanent installation of all Studiofoam panels.   Each can provides coverage for approximately 96 square feet.


  • 23.9 oz. per can
  • Coverage of approximately 96 sq. feet
  • Minumum order amount of 4 cans.

FREE SHIPPING!  See Shipping and Returns Tab below for additional information. 

Price: $24.99
Save to wishlist
Note: you must order at least 4 items
Made in USA

Foamtak Acoustic Foam Spray Adhesive allows for quick and easy installation on all Studiofoam panels.  Formulated with more solids per can than most competing adhesives, product helps you to get more coverage for your money!  Specifically geared for installing Studiofoam, it will not oxidize or eat away at the foam over time. 

How to Use:

Foamtak can be used for both temporary and permanent applications.  Using a thin layer on the foam only will allow easier removal in short-term projects.  For a more permanent, long-term bond, spray a thick layer on both the acoustic foam as well as the wall where the foam will be applied.  Unique spray pattern and nozzle allow for clean installation under all circumstances.  

For a full lineup of superior Auralex products, please visit. 


  • Allows for a temporary or permanent installation of Studiofoam panels.
  • Easy to apply aerosol spray can.
  • Guaranteed not to oxidize Studiofoam panels.
  • Fastest and easiest method to mount Studiofoam.
  • Mounts up to 96 square feet per can depending on thickness of foam.
  • Caution: Studiofoam can be damaged when relocating if not removed properly.  Walls and ceilings will need to be sanded and repainted once Studiofoam is removed.


This product qualifies for FREE SHIPPING!  see Shipping and Returns tab above for additional information. 

For additional Soundproofing Accessories, please visit.

Product Data

Click here to view Foamtak Material Safety Sheet

See also Product Description Tab for more information.

Installation Guide

For a printable version of Foamtak Installation Instructions, please visit.

Installation tips:

  • Depending on how strong you want Foamtak to bond to the mounting surface, you can either spray your acoustic foam, the wall or both.
  • Hold the can approximately 12-18" from the Studiofoam or room surface and shake the can from side to side to yield a "spider web" pattern.
  • You can either stick your acoustic foam to the wall immediately after spraying it or let the Foamtak cure for about 1 minute before sticking the foam into place.  This provides the strongest long-term bond and is the recommended method when mounting Venus Bass Traps, LENRDs and in some cases 4" Studiofoam.
  • You don't have to spray the back of each piece of foam entirely for Foamtak to work (especially with thinner foam), but naturally, the more Foamtak you apply the better adhesion you'll achieve.
  • Begin spraying in the center of the foam, then work out toward the edges, being careful not to get within 1/2" or so of the edges to minimize over spray getting on a part of the foam where it might show. 
  • Storing the Foamtak can upside down between applications may allow a more consistent spray pattern.
  • Use the Studiofoam box lids as spray guards for cleaner installation.
  • Stacking two Studiofoam boxes may yield a convenient work surface.
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING on orders over $75.00.  There will be a $14.99 flat Shipping and Handling fee on orders under $75.00 - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
    • Ships FedEx Ground.
    • Product can not be air shipped.
  • Returns:
    • All sales are final except in the case of a manufacturing defect.
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed

Customers Questions and Answers