Auralex Studiofoam® T

Auralex Studiofoam® T

Studiofoam-T panels were developed for engineers who desired to have a price-conscious Studiofoam solution with a unique and modern aesthetic appeal.  They install in minutes and eliminate standing waves and flutter echo while reducing unwanted reflections.

Studiofoam-T Product Data

FREE SHIPPING!  See Shipping and Returns Tab below for additional information. 

Price: $249.99
Save to wishlist
Made in USA

Studiofoam-T panels can tame the full-frequency bandwith by eliminating standing waves and flutter echo while reducing unwanted reflection.  Made from melamine-free Studiofoam formula which is time honored and wont crumble with age.  It is appropriate for a variety of residential and commercial applications and has succesfully been used in millions of recording studios, broadcast facilities, churches, schools and home theatres. 

Product Design:

Studiofoam-T panels are available in Charcoal Gray with dimensions of 2'X2' or 2'X4', both 12" thick.  They are sold in sets of 12 panels and can be used in conjunction with any other high-quality Auralex panel.

Studiofoam-T panels offer a unique, cost-effective way of achieving the time proven performance that Studiofoam is famous for.   Its upscale design sports a tasteful, seamless appearance with a repeating T-profile pattern.  Panels are colored throughout, they can be cut or trimmed to suit your design and still maintain a uniform color.  They can be easily trimmed preferably with an electric carving knife for optimal visual appeal.  Panels have product consistency and can be aligned seamlessly for a clean and professional look.

Cleaning and Maintenance Information:

Studiofoam is made from open-celled material therefore it is strongly advisable to avoid contact with water.  Moisture trapped in the material can cause mold which causes cleanliness issues but will not affect acoustic performance.  When cleaning the foam it is recommended to dry dust or use the upholstery attachment on a vacuum cleaner.

PLEASE NOTE: These panels are not fire-rated.  In applications where fire-rating is a priority, please see our Sonex Panels.


  • Eliminates standing waves and flutter echo
  • Reduces unwanted reflections
  • Decreases slap back and room-ring
  • Tames full-frequency bandwidth
  • Unique aesthetic appeal; for both commercial and residential applications
  • Easy installation using FoamTak Spray Adhesive, Tubetak Pro Liquid Adhesive or E-Z Stick Pro Tabs.
  • Proprietary Auralex formula that won't crumble with age


For additional soundproofing ideas for walls, please visit.  

Installation Guide
For a printable version of Installation Instructions for Auralex Studiofoam Panels, please visit.
  • Prior to mounting, mark desired panel locations on the wall with small pencil marks or masking tape.
  • If you need to cut your Studiofoam, it is recommended to use a straight edge and an electric carving knife.  Don't force the knife; let the blades do the work.

EZ-Stick Pro:

Clean attachment points on the wall surface with Isopropyl alcohol (avoid household cleaners), wipe gently and let dry.  Separate the EZ-Stick Pro Tabs from each other.  Remove one of the paper release liners from the strip.  Apply the tabs on the rear of the panel near the outside edges, orient vertically for maximum holding strength.  Remove the second paper release liner from the backside of the tab, position the panel with the target location on the wall and press firmly to attach.  Use 4 tabs for a 2'x2' Studiofoam panel and 6 tabs for a 2'x4' panel.

Tubetak Pro Liquid Adhesive & Foamtak Spray Adhesive:

Both are contact adhesives, so wait a period of time after applying it to the back of the panel before trying to adhere the panel to the wall.

  • Tubetak Pro (caulk gun required) typically works better if it is spread thin, use a putty knife if needed.  If the adhesive seems to take a while to dry (cure time can be dependent on humidity and other environmental factors), you may consider supporting the panel in place with a T-pin or finish nail.
  • If you are using Foamtak (US only), hold the can 12 to 18" away from the Studiofoam and shake the can from side to side to yield a spider web pattern.  For best results apply to both surfaces, allow 45 seconds to tack and then apply.  For a more temporary bond apply the Foamtak to one surface only.  Storing the Foamtak upside down between applications may allow a more consistent spray pattern.  You can use the Studiofoam carton as spray shields for a cleaner installation.  Stacking two Studiofoam cartons can provide a convenient work surface.

TEMP Tabs:

TEMP Tabs are a semi-permanent mounting kit that is a great way to temporarily install your Studiofoam.  Removing the tabs causes some minimal damage to walls that may require spot repairs.

Other Mounting Options:

  • T-Pins or Finish Nails can be used to tack the panels in place for a quick installation with minimal wall damage.  Sometimes larger nails or panel movement can cause the foam to tear, so this is usually best as a temporary installation method.
  • Studiofoam can be mounted to a backing (such as pegboard, Corex, cardboard, plastic, plywood, etc) before installing it on a wall.  This assembly allows for added durability when relocating/repurposing Studiofoam panels.


  • EZ-Stick Pro Tabs may not adhere well to some vinyl wallpapers.  Apply to surfaces above 50° F (10° C).  Adhesive could soften and lose adhesion above 105º F (40° C).  EZ-Stick Pro Tabs are considered permanent and will damage the wall surface when removed.
  • Both Tubetak Pro and Foamtak are considered permanent installations.  Removing a panel after the adhesive has cured can result in some damage to the Studiofoam and the mounting surface.  Auralex is not responsible for any damage to walls, floors, ceiling or the overall structure that occurs doing installation or removal of our products.  Try using a flat edge knife to carefully scrape the panel away from the wall to minimize tearing, and then use a citrus-based adhesive remover.
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING on this product - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
  • Returns:
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed

Customers Questions and Answers