Auralex Studiofoam® Metro Panels

Auralex Studiofoam® Metro Panels

Auralex Metro Panels provide a sleek, upscale appearance while enhancing sound ambiance.  The different height protrusions spread sonic energy as well as absorb a slightly different slice of the frequency spectrum.  Panels are provided in one standard size with two thickness options and a dazzling array of colors.  


Auralex Metro Options

FREE SHIPPING!  See Shipping and Returns tab below for additional information.

Price: $559.99
Save to wishlist
Made in USA

Auralex Studiofoam® panels are designed with high density, open celled Polyurethane.  It is designed with the environment in mind, using a specialized formula boasting 36% less global warming emissions as well as a lesser dependency on fossil fuels over conventional foams.  This greener formula both takes care of the environment yet retains the longevity and acoustical properties for which Auralex is famous.

PLEASE NOTE: These panels are not fire-rated.  In applications where fire-rating is a priority, please see our Sonex Panels.

Studiofoam® Metro panels boast a unique contour of varying heights allowing you to create an architectural look with outstanding acoustical properties.  The unique design allows sound to be absorbed and diffused at different heights thereby covering all frequencies as well as depleting the sound energy ensuring that the remaining sound is evened out.  This leaves the room with a smoother yet not too dry sonic character.  

Panels are colored throughout, they can be cut or trimmed to suit your design and still maintain a uniform color.  Panels are flexible and can easily be trimmed preferably with an electric carving knife for optimal visual appeal.  Panels have product consistency and can be aligned seamlessly for a clean and professional look.  


  • Offices
  • Places of worship
  • Home theatres
  • Recording studios
  • Control rooms


  • NRC ratings: 2" panels - .70, 4" panels - 1.10. 
  • Produced with special Eco friendly materials for 36% less green house emissions and dependency on fossil fuels.
  • Improved performance and durability over conventional solvent foams. 
  • Withstands environmental conditions - won't crumble over time.
  • Flexible, bounces back to shape when pressed against.

How To Order:

Choose from our wide color selection to best suit your decor′.  Select the color of your choice to view the color sample in large or see the full color chart in the Product Data tab above.  Actual color may vary based on your monitor setting.  It is advisable to order a color sample prior to ordering panels.  Please email us with your selection and shipping address and we will be happy to send you a free color sample.  Panels are available in 24"X48"X2" with 12 panels per case or 24"X48" with 6 panels per case.  4" panels are recommended for larger rooms or where more sound absorption is required.  

FREE SHIPPING!  See Shipping and Returns tab above for additional information.

For our complete line of Auralex products, please visit. 

Product Data

Acoustical Performance:

Acoustic Performance for Auralex Studiofoam Metro

Cleaning and Maintenance Information:

Since Studiofoam is an open-cell material, we strongly advise against getting it wet.  Any moisture trapped in the cells can mold and create more cleanliness issues, although it will not affect performance.  For cleaning the foam you can dry dust or use an upholstery attachment on a vacuum cleaner.  

Installation Guide

For a printable version of Installation Instructions for Auralex Studiofoam Panels, please visit.

  • Prior to mounting, mark desired panel locations on the wall with small pencil marks or masking tape.
  • If you need to cut your Studiofoam, it is recommended to use a straight edge and an electric carving knife.  Don't force the knife; let the blades do the work.

EZ-Stick Pro:

Clean attachment points on the wall surface with Isopropyl alcohol (avoid household cleaners), wipe gently and let dry.  Separate the EZ-Stick Pro Tabs from each other.  Remove one of the paper release liners from the strip.  Apply the tabs on the rear of the panel near the outside edges, orient vertically for maximum holding strength.  Remove the second paper release liner from the backside of the tab, position the panel with the target location on the wall and press firmly to attach.  Use 4 tabs for a 2'x2' Studiofoam panel and 6 tabs for a 2'x4' panel.

Tubetak Pro Liquid Adhesive & Foamtak Spray Adhesive:

Both are contact adhesives, so wait a period of time after applying it to the back of the panel before trying to adhere the panel to the wall.

  • Tubetak Pro (caulk gun required) typically works better if it is spread thin, use a putty knife if needed.  If the adhesive seems to take a while to dry (cure time can be dependent on humidity and other environmental factors), you may consider supporting the panel in place with a T-pin or finish nail.
  • If you are using Foamtak (US only), hold the can 12 to 18" away from the Studiofoam and shake the can from side to side to yield a spider web pattern.  For best results apply to both surfaces, allow 45 seconds to tack and then apply.  For a more temporary bond apply the Foamtak to one surface only.  Storing the Foamtak upside down between applications may allow a more consistent spray pattern.  You can use the Studiofoam carton as spray shields for a cleaner installation.  Stacking two Studiofoam cartons can provide a convenient work surface.

TEMP Tabs:

TEMP Tabs are a semi-permanent mounting kit that is a great way to temporarily install your Studiofoam.  Removing the tabs causes some minimal damage to walls that may require spot repairs.

Other Mounting Options:

  • T-Pins or Finish Nails can be used to tack the panels in place for a quick installation with minimal wall damage.  Sometimes larger nails or panel movement can cause the foam to tear, so this is usually best as a temporary installation method.
  • Studiofoam can be mounted to a backing (such as pegboard, Corex, cardboard, plastic, plywood, etc) before installing it on a wall.  This assembly allows for added durability when relocating/repurposing Studiofoam panels.
  • Notes:
  • EZ-Stick Pro Tabs may not adhere well to some vinyl wallpapers.  Apply to surfaces above 50° F (10° C).  Adhesive could soften and lose adhesion above 105º F (40° C).  EZ-Stick Pro Tabs are considered permanent and will damage the wall surface when removed.
  • Both Tubetak Pro and Foamtak are considered permanent installations.  Removing a panel after the adhesive has cured can result in some damage to the Studiofoam and the mounting surface.  Auralex is not responsible for any damage to walls, floors, ceiling or the overall structure that occurs doing installation or removal of our products.  Try using a flat edge knife to carefully scrape the panel away from the wall to minimize tearing, and then use a citrus-based adhesive remover.
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING on this product - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
  • Returns:
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed

Customers Questions and Answers