Auralex SonoColumns

Auralex SonoColumns

SonoColumns are an excellent decorative alternative for low-frequency absorption issues and can be placed in corners where bass buildup tends to congregate.

SOLD BY THE CASE:

  • 4 Columns per case 
  • Dimensions:  12" Width X 6" Depth X 48" Length

FREE SHIPPING!  See Shipping and Returns Tab below for additional information.

Price: $459.99
Color
Dimensions
Qty
Save to wishlist
Made in USA
SKU AUR-SCLM1
Description

SonoColumns offer effective, acoustic management for low-frequency control in all areas without requiring huge investments of effort and expense.  With an NRC rating of 1.40 they are an unbeatable addition to any soundproofing project.  They offer a distinctive look for soundproofing walls and corners where bass buildup tends to occur.  Columns are 4' and can be stacked on top of each other to create a wall to ceiling column.  SonoCollars are available to fill in the gaps between the wall and ceiling.

SonoColums are made of high-quality Studiofoam which is durable and painted throughout the material.  Panels are flexible and easy to trim preferably with an electric carving knife for optimal aesthetic appeal.  Panels are uniformly cut thereby providing a seamless installation and professional appearance.  Can be installed easily with either Foamtak Spray Adhesive or TubeTak Pro Adhesive

For a finishing touch to SonoColums, see our SonoCollars which are designed to cap each column. 

PLEASE NOTE:  These panels are not fire-rated.  In applications where fire-rating is a priority, please see our Sonex Panels.

Features:

Applications:

  • Recording Studios
  • Mixing Rooms
  • Home Theatres
  • Any Critical Listening Environment 

FREE SHIPPING!  See Shipping and Returns Tab above for additional information.

For additional bass trap options, see our Auralex Cornerfills or Auralex Sunbursts.

Product Data

Acoustic Performance:

Auralex SonoColumns Acoustic Performance

Cleaning and Maintenance Information:

Since Studiofoam is an open-cell material, we strongly advise against getting it wet.  Any moisture trapped in the cells can mold and create more cleanliness issues, although it will not affect performance.  For cleaning the foam you can dry dust or use an upholstery attachment on a vacuum cleaner.  

Installation Guide

For a printable version of Installation Instructions for Auralex Studiofoam Panels, please visit.

  • Prior to mounting, mark desired panel locations on the wall with small pencil marks or masking tape.
  • If you need to cut your Studiofoam, it is recommended to use a straight edge and an electric carving knife.  Don't force the knife; let the blades do the work.

EZ-Stick Pro:

Clean attachment points on the wall surface with Isopropyl alcohol (avoid household cleaners), wipe gently and let dry.  Separate the EZ-Stick Pro Tabs from each other.  Remove one of the paper release liners from the strip.  Apply the tabs on the rear of the panel near the outside edges, orient vertically for maximum holding strength.  Remove the second paper release liner from the backside of the tab, position the panel with the target location on the wall and press firmly to attach.  Use 4 tabs for a 2'x2' Studiofoam panel and 6 tabs for a 2'x4' panel.

Tubetak Pro Liquid Adhesive & Foamtak Spray Adhesive:

Both are contact adhesives, so wait a period of time after applying it to the back of the panel before trying to adhere the panel to the wall.

  • Tubetak Pro (caulk gun required) typically works better if it is spread thin, use a putty knife if needed.  If the adhesive seems to take a while to dry (cure time can be dependent on humidity and other environmental factors), you may consider supporting the panel in place with a T-pin or finish nail.
  • If you are using Foamtak (US only), hold the can 12 to 18" away from the Studiofoam and shake the can from side to side to yield a spider web pattern.  For best results apply to both surfaces, allow 45 seconds to tack and then apply.  For a more temporary bond apply the Foamtak to one surface only.  Storing the Foamtak upside down between applications may allow a more consistent spray pattern.  You can use the Studiofoam carton as spray shields for a cleaner installation.  Stacking two Studiofoam cartons can provide a convenient work surface.

TEMP Tabs:

 

TEMP Tabs are a semi-permanent mounting kit that is a great way to temporarily install your Studiofoam.  Removing the tabs causes some minimal damage to walls that may require spot repairs.

Other Mounting Options:

  • T-Pins or Finish Nails can be used to tack the panels in place for a quick installation with minimal wall damage.  Sometimes larger nails or panel movement can cause the foam to tear, so this is usually best as a temporary installation method.
  • Studiofoam can be mounted to a backing (such as pegboard, Corex, cardboard, plastic, plywood, etc) before installing it on a wall.  This assembly allows for added durability when relocating/repurposing Studiofoam panels.

Notes:

  • EZ-Stick Pro Tabs may not adhere well to some vinyl wallpapers.  Apply to surfaces above 50° F (10° C).  Adhesive could soften and lose adhesion above 105º F (40° C).  EZ-Stick Pro Tabs are considered permanent and will damage the wall surface when removed.
  • Both Tubetak Pro and Foamtak are considered permanent installations.  Removing a panel after the adhesive has cured can result in some damage to the Studiofoam and the mounting surface.  Auralex is not responsible for any damage to walls, floors, ceiling or the overall structure that occurs doing installation or removal of our products.  Try using a flat edge knife to carefully scrape the panel away from the wall to minimize tearing, and then use a citrus-based adhesive remover.
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING on this product - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
  • Returns:
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
 
Reviews
Recently Viewed
Q&A