TEMP Tabs Acoustic Foam Mounting Kit

TEMP Tabs Acoustic Foam Mounting Kit
0.0

TEMP-Tabs provide an excellent mounting solution for temporary applications which minimizes damage to the walls as well as the Studiofoam panels.  Designed for easy installation with maximum flexibility. 

PRICED PER PACKAGE:

  • 72 Temp-Tabs per package
  • 72 Velcoins® per package

FREE SHIPPING!  See Shipping and Returns Tab below for additional information.

Price: $69.99
Qty
Save to wishlist
Made in USA
SKU TTAB-KIT
Description

TEMP-Tabs are designed for easy installation and removal making relocating your acoustic foam panels a breeze.  With TEMP-Tabs there is no need to use adhesives that may ruin the foam or wall when moving the panels.  They are recommended for offices, apartment buildings, condos, rental units or any area that needs a high-quality mounting solution that is easy to remove when needed.

The TEMP-Tabs mounting solution protects both your acoustic foam as well as minimizes damage to your walls. There is no need to glue your foam, the foam mounts to the wall using EZ-stick Pro Tabs in conjunction with the included Velcro tabs.  When relocating your panels, simply remove the Velcoins® Tabs from the wall with a putty knife and apply new Velcoins® to your wall  when you are ready to reinstall your panels in a new location.

Features:

  • Temporary & easy mounting solution for your Studiofoam
  • Instant bond, just peel & stick
  • Minimal wall damage upon removal
  • No additional application tools required
  • Includes 72 tabs and 72 Velcoins®

Applications:

This product qualifies for FREE SHIPPING!  See Shipping and Returns Tab above for additional information. 

For an additional premium adhesive option for temporary applications, see our Foamtak Spray Adhesive

Installation Guide

Installation Tips:

For a printable version of Installation Instructions for Temp-Tabs Acoustic Foam Mounting Kit, please visit.

Auralex TEMP-Tabs Installation

Use four tabs for 2'X2' panels and six tabs on 2'X4' panels. Use two tabs for smaller 1'X1' panels.


  • Using a level, locate where the panels will hang on the wall.  Use a pencil to mark the final locations on the walls.
  • Spot clean the target attachment points on the wall with rubbing alcohol.
  • Separate the EZ-Stick Pro tabs and press into place on the rear surface of the panel "portrait style" (vertically) just inboard of the panels edges.  Repeat for the remaining tabs.
  • Peel the hook part of the supplied Velcoins® off the clear plastic release strip and apply one to each plastic TEMP-Tab. 
  • Leave the loop half of the Velcoins® on the clear plastic release strip and cut into individual coins using scissors.
  • Press the individual loop half of the Velcoins® onto the hook part of the Velcoins® already attached to the TEMP-Tabs.  Peel the plastic release layer off of the back of the Velcoin assembly.
  • Align the panel with the locating marks on the wall and press firmly on the front side of the panel, opposite the tabs to adhere to the wall.  If the half of the Velcoin® that is attached to the wall should come loose, mark it's location on the wall with  a small pencil mark, separate it from the hook and reattach to the wall with a staple. 

 

PLEASE NOTE:

  • Be advised that some localized paint damage can occur with the removal of the peel and stick Velcoins® from the wall surface.
  • Mounting 4" Studiofoam (or thicker) to a ceiling using TEMP-Tabs is not recommended unless extra Velcoins are used.  
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING on orders over $75.00.  There will be a $14.99 flat Shipping and Handling fee on orders under $75.00 - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
    • Ships FedEx Ground.
  • Returns:
    • All sales are final except in the case of a manufacturing defect.
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
 
Reviews
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed
Q&A

Customers Questions and Answers

1) Rautha G: Hi, I would like to create an acoustic plug using the foam.My idea is to attach this foam mounting kit to enable me remove it daily when I need ligt in the room.Will these tabs hold out if I move them so often?

Trademark Soundproofing Reply: You may have to use a more permanent glue to hold the wall tabs in place if they will be put on and off daily.