RSIC Multi Clip

RSIC Multi Clip
RSIC Mulit Clip with RSIC-1 Clip Actual Image RSIC Multi Clip with Thread Bolt Actual Image RSIC Multi Clip with RSIC-DC04 Clip and Thread Bolt RSIC Multi Clip with RSIC-DC04 Clip

The RSIC-Multi Clip is a multi-use hanger. It has four hanger mounts which can accomodate hanger wire, pencil rod, 1/4” threaded rod and 3/8” threaded rod. With allowable hold capacity of 236 Lbs, the RSIC-Multi Clips versatility makes it the one and only clip that can be used throughout the project for all trades.

PRICED PER PIECE

Price: $1.35
Qty
Save to wishlist
Note: you must order at least 10 items
Made in USA
SKU RSIC-MULTI
Description

The RSIC-Multi Clip is a multi-use hanger. It has four hanger mounts for hanger wire, pencil rod, 1/4” threaded rod and 3/8” threaded rod. With allowable hold capacity of 236 Lbs, the RSIC-Multi Clips versatility makes it the one and only clip that can be used throughout project for all trades!

How It Works:

The RSIC-Multi Clip has a flex point at the fastener position to allow attachment to a vertical surface, and angled surface, or a flat surface such as a corrugated metal deck, wood or steel joist. It can be shot into concrete or steel with a gas or powder system or can be fastened to wood and light gauge steel systems with a standard screw (verify fasteners published hold capacity meets or exceeds that of the RSIC-Multi Clip).

The RSIC-Multi Clip, when used in conjunction with the RSIC-1 Noise Control Clip, delivers superior noise control with ease of installation and adjustability for ceiling framing or concrete variances in height. The Multi Clip is also compatible with RSIC-1 DC04 Series Clip.

Product Features:

The RSIC-Multi Clips uses
include but are not limited to:

RSIC Options:

RSIC Applications:

 

  • Plumbing
  • HVAC Systems
  • Electrical Systems
  • Lighting Systems
  • Acoustical Ceilings
  • Gypsum Board Ceilings

 

  • Ceiling Hanger
  • Screw To Wood
  • Screw To Steel
  • Shoot Into Concrete
  • Mechanical Hanger
  • Plumbing Hanger
  • Electrical Hanger
  • Condos
  • Time Share / Fractional Ownership
  • Apartments
  • Hotels / Motels
  • Single Family
  • Home Theater
  • Commercial Theater

Hanger Mounts:

Allowable Weight:

 
  • 1/4” Threaded Rod/Bolt
  • 3/8” Threaded Rod/Bolt
  • Hanger Wire
  • Pencil Rod
  • Tension Allowable: 236 Lbs
  • Tension Ultimate: 1187 Lbs
 
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product is in stock and usually ships within 48 Hours.
    • FREE SHIPPING on orders over $75.00. There will be a flat $14.99 shipping and handling fee on orders under $75.00. - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
    • Ships via major carriers, such as UPS or FedEx Ground, with tracking information provided.
  • Returns:
    • Product may be returned up to 60 days if in brand new condition.
    • A $10.00 fee will be charged to cover or original shipping cost.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.
    • Return shipping is customer's responsibility. A return address will be provided with RMA#.
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
 
Reviews
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.
pros
  • These look like they would be useful (1)
cons
  • They don't come with any directions (1)
best uses

Reviewed by 1 customers

Displaying reviews 1-1

By Mark

from Shawnee, KS

Verified buyer
3.0
Look useful, but not sure how
06/10/16
pros
  • These look like they would be useful
cons
  • They don't come with any directions
best uses
Comments about RSIC Multi Clip:
I was hoping to use these for hanging can lights prior to sheetrocking, but there are no instructions on how to use these. They have several different holes and thread sizes, but it's not clear how to use them. They certainly seem sturdy.
Displaying reviews 1-1
Recently Viewed
Q&A

Customers Questions and Answers

1) Mark K: Do you have any specific instructions on how to use the RSIC multi-clips? I'm looking for how to attach can light housings to the hat tracks so that they are flush with the ceiling, and I thought these clips would help do that. I'm not sure if you have to bend them or if there is some easy way to use them.

Trademark Soundproofing Reply: Hi Mark, There are no specific instructions as these are very versatile clips that can be used in any way you like. You can bend one end so that it takes on an L shape.

2) Mark K: How are they supposed to attach to hat track? Or do they attach to the clip? Do you have to screw them in place with a certain type of screw. A piece of wire is a very versatile tool, but is not very elegant and is hard to align exactly. The clips may be very useful, but not if there is not an easy way to attach them to anything.

Trademark Soundproofing Reply: Hi Mark, These clips are not meant to be used with hat channel. They are used on their own usually with drywall screws going through the side hole.