Pac International

Pac International

Products

RSIC-1 - Resilient Sound Isolation Clip
RSIC-1 - Resilient Sound Isolation Clip
SKU: RSIC-1_10PACK

Resilient Sound Isolation Clips (RSIC) is used in the process of decoupling walls, ceilings and floors. Mechanically decoupling walls/ceilings can add up to 20 STC points. The RSIC-1™ clip is designed for Wood, Steel, and Concrete Walls and Ceilings and is Classified UL rated. Clips can be ordered per piece or in bulk packaging of 10 clips with installation screws included.

RC-1 Boost Sound Isolation Clip
RC-1 Boost Sound Isolation Clip
SKU: RC-1

Sound Isolation Clips are used in conjunction with resilient channels for a low cost method of reducing sound transmission. This assembly decouples the drywall from the structure to prevent sound from traveling through, adding up to 7 STC points. The RC-1 Boost™ clip is designed for Wood Framed and Steel Framed Walls and Ceilings and is Classified UL rated.

PRICED PER PIECE

Special Quantity Discounts begin at 500 clips. See below for details. 

RSIC-1 Low Profile Clip
RSIC-1 Low Profile Clip
SKU: RSIC1-LP

RSIC-1 Low Profile Clips are used in the process of decoupling walls, ceilings and floors, to prevent sound vibrations from traveling from one side of the structure to the other. The Low Profile Clips is designed for use on a ceiling or wall to recess the furring channel into the cavity and reduce the overall profile of the RSIC acoustical isolation system to as little as 1/2”!

Mechanically decoupling walls/ceilings can add up to 20 STC points, See more info in the description below.

PRICED PER PIECE.

FREE SHIPPING applies to orders over $75.00!

RSIC 1.5" Cold Rolled Channel Clips for Drop Ceiling
RSIC 1.5" Cold Rolled Channel Clips for Drop Ceiling
SKU: RSIC-CRC

The RSIC-1.5” CRC® Clip is designed for use with any joist or concrete application where a dropped drywall ceiling is required. This assembly combines a 1.5” CRC Clip with a Hat Channel System to decouple the Gypsum Board from the floor structure above, giving the assembly enhanced acoustical performance, while allowing for a chase to hide mechanical ducting and plumbing lines.

PRICED PER CLIP

RSIC-DC04 Series - For Decoupling Heavy Items
RSIC-DC04 Series - For Decoupling Heavy Items
SKU: RSIC-DC04

The RSIC-DC04 Series is a universal and versatile product line with many possible applications. It is ideal when heavy items need to be decoupled for sound isolation.

RSIC-DC04 Series is available in the following variations:

DC04: Acoustical Design Load 36 LB Load (Allowable Load 225 LB)
DC04x2: Acoustical Design Load 72 LB Load (Allowable Load 450 LB)
DC04HD: Acoustical Design Load 144 LB Load (Allowable Load 400 LB)
DC04HDx2: Acoustical Design Load 288 LB Load (Allowable Load 900 LB)

PRICED PER PIECE.

Special Quantity Discounts begin at 200 clips. See below for details. FREE SHIPPING applies to orders over $75.00!

RSIC-1 EXT04 - Clip with Additional Drop
RSIC-1 EXT04 - Clip with Additional Drop
SKU: RSIC-EXT04

The RSIC-1 EXT04 Clip is comparable to our RSIC-1 Resilient Sound Isolation Clip however, it is designed for use where additional drop for HVAC, Plumbing or Electrical Chases is needed. These clips give you the flexibility to drop a ceiling as much as 4” from its original height, while retaining superior performance.

PRICED PER PIECE

Quantity Discounts start at 100 Pieces. See below for details. FREE SHIPPING applies to orders over $75.00!

RSIC-SI-CRC Clip with Spring Isolator, Ceiling Soundproofing
RSIC-SI-CRC Clip with Spring Isolator, Ceiling Soundproofing
SKU: RSIC-SI-CRC-10LB.

RSIC-SI-CRC combines a CRC clip with a rubber encased spring isolator clip, engineered for full 1" deflection. 

  • Drop ceiling applications
  • Variety of weight capacities
  • Can add up to 5 IIC points, over installations using standard RSIC clips.
  • Can be used on wood, steel and concrete applications (with modification.)

PRICED PER CLIP

FREE SHIPPING applies for orders over $75.  See Shipping and Returns tab below for additional information. 

RSIC-2 For Wall with Door Frame
RSIC-2 For Wall with Door Frame
SKU: RSIC-2

The RSIC-2 Clip is a cost effective clip designed for soundproofing wall assemblies where door frames may be present. The RSIC-2 adds an additional 3/8” to the standard RSIC-1 Clip, creating a total thickness of 2”, thereby standardizing the components in the wall assembly to comply with industry standards.

PRICED PER CLIP

RSIC-1 Backer Clips for Heavy Loads
RSIC-1 Backer Clips for Heavy Loads
SKU: RSIC-BB_STD

The RSIC-Backer® series is a heavy duty mount used together with a RSIC-1 Clips and Hat Channel Assembly, creating the only complete noise isolation system that can support heavy items. The RSIC-Backer Clip acoustically decouples heavy items for noise and vibration isolation, ideal for Cabinet Support, Chalk Boards and Projector Screens (see below for more). Available in Standard and Heavy Duty Clips.

RSIC-BB Standard - Acoustical Design Load 108 Lbs.
RSIC-BB Heavy Duty- Acoustical Design Load 216 Lbs. 

PRICED PER CLIP

RSIC Multi Clip
RSIC Multi Clip
SKU: RSIC-MULTI

The RSIC-Multi Clip is a multi-use hanger. It has four hanger mounts which can accomodate hanger wire, pencil rod, 1/4” threaded rod and 3/8” threaded rod. With allowable hold capacity of 236 Lbs, the RSIC-Multi Clips versatility makes it the one and only clip that can be used throughout the project for all trades.

PRICED PER PIECE

RSIC Security / Retainer Strap
RSIC Security / Retainer Strap
SKU: RSICSTRAP

RSIC Security / Retainer Strap is designed to enhance the load safety margin in high abuse areas. It is compatible with the RSIC-1, as well as others, see below. When using a security strap it holds up to 185 LB per connection!

2 RSIC Security Straps are needed for each RSIC-1 connection.

PRICED PER PIECE