Owens Corning R-19 EcoTouch Insulation Batts

Owens Corning R-19 EcoTouch Insulation Batts

Owens Corning R-19 Ecotouch insulation is flexible, easy to install and recommended for basement walls, crawlspaces, 2X6 walls and floors.  Available in both unfaced or high-quality Kraft faced batts for maximum insulation in all environments.  Choose from a wide array of sizing options to optimize ease and efficiency when installing insulation.


  • There is a minimum order amount of 25 bags of batts.
  • If product shows as unavailable in your area, please email us with your shipping address and amount needed and we will check availability for you.

Owens Corning R-19 Product Options

Free Shipping!  See Shipping and Returns Tab below for more information.

Price: $68.62
Note: you must order at least 25 items
This product is only available in limited areas. Please login or enter zipcode to check availability
Your zipcode:
Made in USA

Using the right insulation will increase R-value and improve energy efficiency.  R-value refers to resistance to heat flow, the higher the R-value the greater the insulating power.  Owens Corning, EcoTouch, Pure-Fiber insulation is formulated with tiny air pockets trapped in the insulation which resist the passage of heat resulting in less heat loss in the winter and less heat gain in the summer.  Compressing the insulation will result in a loss of R-value as the air pockets are compressed (see Product Data tab for more information.)  In addition, EcoTouch insulation is designed to improve the Sound Transmission Class (STC) of walls and floor/ceiling assemblies.

EcoTouch Fiberglass Insulation is formulated with Pure Fiber Technology for a high-quality, economy friendly choice.  Our unique line of insulation is 100% Formaldehyde free and contains more than 99% natural ingredients and a minimum of 58% recycled content.  

Owens Corning, EcoTouch insulation is available in both unfaced and Kraft faced options.  Kraft faced insulation has a strong asphalt-coated paper facing on one side which acts as a high-quality vapor retarder.  Vapor retarders help control the amount of moisture passing through insulation and collecting inside exterior walls, ceilings and floors.  (For more information regarding Kraft Faced Insulation, please visit.)  Unfaced insulation can be friction fit into place thereby minimizing the need for stapling or securing the batts. It is also recommended when adding a layer of insulation over an existing layer of insulation which already has a vapor retarder.

R-19 EcoTouch Insulation is recommended for basements, 2X6 walls, crawlspaces and floors  It is available in a variety of convenient size options to fit most standard wood or metal framing cavities or can be installed between furring strips.

For additional top-quality insulation ideas, please visit our Owens Corning R-21 EcoTouch Insulation Batts.


EcoTouch Insulation is easy to handle and install.  Sized for installation in either wood or metal frame construction, EcoTouch Kraft faced Insulation can be friction fit or stapled into place.  Stapling flanges are provided for standard frame widths. Trimming and fabrication can be done with an ordinary utility knife and is easily installed into odd-shaped cavities and small spaces.  To achieve optimal R-60 insulation, R-19 batts can be installed over existing insulation for areas with severe insulation issues.


  •  Can be easily cut and split to insulate odd shaped cavities and around outlets, switches and other small spaces.
  •  Excellent stiffness and recovery characteristics,gives off less dust than most fiberglass products.
  •  Completely fills the cavity, eliminating gaps and the need for additional handwork.
  •  Installs in minutes, can be friction fit or stapled into place.
  •  Due to its inorganic nature, it will not rot or mildew and is non-corrosive to steel, copper and aluminum.
  •  EcoLogo rated as a top environmental  choice, 100% Formaldehyde free, contains more than 99% natural ingredients, minimum of 58% recycled content.
  •  GREENGUARD Children & School certified
  •  Unique SpaceSaver Technology, minimizes Shipping and Handling costs.


  • Basement walls 
  • Floors
  • 2X6 walls
  • Crawl spaces

How To Order:

R-19 Ecotouch insulation comes in a variety of convenient sizing options to best suit your design application, thereby minimizing the need for resizing or compressing the batts.  For areas where a vapor retarder is called for, choose from our Kraft faced options.  For all other areas,  choose from our unfaced options.  The chart above details the exact coverage and amount of batts per package for each size.  

Please note, there is a 25 piece minimum on this product. 

This product qualifies for FREE SHIPPING.  See Shipping and Returns tab above for more information.

Click here to return to our TradeMark Soundproofing Home Page

Product Data

Product Data for R-19 EcoTouch Insulation-

For a printable version of Product Data for Owens Corning R-19 EcoTouch insulation, please visit.

Owens Corning R-19 EcoTouch Insulation Product Data

Compression Chart for Eco-Touch Insulation-

For a printable version of the Compressed R-value Chart, click here.

Compression Chart for Eco-Touch Insulation

Installation Guide

For a printable version of Installation Instructions for R-19 Ecotouch Fiberglass Batts, click here. 

General Installation Instructions:

  • Leave insulation in its wrapper until you’re ready to use it.  Packaged insulation is highly compressed and expands greatly when the wrapper is opened.
  • Use precut batts in walls for easier handling.
  • Use continuous rolls in attics and floors because of longer joist spans.
  • To cut insulation, lay it on a board, facing down if applicable.  Lay a yardstick (or 2x4) over the area of insulation to be cut.  Press your straightedge down hard and cut with a utility knife, using the straightedge as a guide.
  • Do not install insulation on top of or within 3" of recessed light fixtures unless the fixtures are approved for such use.  This is a requirement of the National Electric Code.

Preparation Instructions:

Before beginning any insulation project, be sure to;

  • Prevent air infiltration by caulking and sealing all top and bottom plates, sealing any wire or open penetrations and weather-stripping attic access openings.
  • Gather any necessary tools.
  • Wear the proper protective gear (follow package recommendations).

R-19 Installation:

  • R-19 EcoTouch insulation is intended to be friction-fit between exterior wall wood studs.
  • Friction-fit unfaced insulation between studs after cover material has been installed on one side of the cavity.
  • Use wire or metal straps to hold insulation in place in applications without a cover material.
  • When faced insulation is used, staple attachment flanges to face or side of stud every 8" or 12" to prevent gaps along the edge of the vapor retarder. 
  • Install insulation to fit tightly between framing members.  If necessary, insulation batts can be cut down to size. Do not compress batts as compressing batts leads to a loss of R-value.
  •  Fill small openings around windows and doors with leftover pieces of insulation.
  • If electrical wiring passes through the center of the wall, split insulation and pass insulation behind and in front of the cable.
  •  Cover insulation with plasterboard or other approved interior material. 
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING on this product - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
  • Returns:
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed

Customers Questions and Answers