Auralex Studiofoam®Pro Panels

Auralex Studiofoam®Pro Panels

StudiofoamPro Panels offer an exclusive melamine-free acoustic foam panel with long-lasting physical properties for high-quality soundproofing that will last for years to come.  


Studiofoam Pro Panels Product Options

FREE SHIPPING!  See Shipping and Returns Tab below for additional information. 

Price: $349.99
Save to wishlist
Made in USA

StudiofoamPro is the first melamine-free acoustic foam with a Class A fire-rating.  Panels are thin but offer a high noise reduction coefficient of .90 which is more than 2" Studiofoam Wedges.  Due to a unique chemical formulation, Pro Panels have outstanding durability due to reduced oxidation.  They will not rot, crumble or suffer surface harm from normal use.  They present a low cost option for sound absorption in churches, restaurants, clubs, professional settings or any area that requires Class A fire-rating without compromising on quality.

Available in two convenient sizes of 24"X24" and 24"X48", both 1.5" thick  Comes with a stylish beveled edge to compliment your acoustic decor′.  Product is designed with product consistency to ensure a professional and neat appearance.   Pro Panels are dyed throughout the foam and can therefore be cut or trimmed without impacting on the finished appearance. 


  • Churches
  • Restaurants
  • Clubs
  • Classrooms
  • Night Clubs
  • Studios
  • Professional Settings
  • Any area requiring Class A fire-rating 


  • Outstanding durability due to reduced oxidation; will not rot, crumble or suffer surface harm.
  • Available in 2 convenient sizes with a stylish beveled edge. 
  • Class A fire-rating per ASTM E-84, for flame spread and smoke density.
  • Passes MVSS 302, fire test requirement for materials installed in motor vehicles.
  • Passes UL 94 HF 1,2 fire-rating test for non-structural foam materials.
  • Passes California Technical Bulletin 117 (Cal 117), open flame test and smoldering cigarette test. 

How To Order:

Choose from our two convenient sizing options of 24"X24" or 24"X48".  Product is available in charcoal and is dyed throughout the foam.  

This product qualifies for FREE SHIPPING!  See Shipping and Returns Tab above for additional information. 

To view our great selection of wall panels and ceiling baffles, please visit.

Product Data

Acoustical Performance:

Studiofoam Pro Panels Product Data

Cleaning and Maintenance Information:

Since Studiofoam is an open cell material, we strongly advise against getting it wet.
 Any moisture trapped in the cells can mold and create more cleanliness issues, although it will not affect performance.  
For cleaning the foam you can dry dust or use an upholstery attachment on a vacuum cleaner. 

Installation Guide
For a printable version of Installation Instructions for Auralex Studiofoam Panels, please visit.
  • Prior to mounting, mark desired panel locations on the wall with small pencil marks or masking tape.
  • If you need to cut your Studiofoam, it is recommended to use a straight edge and an electric carving knife.  Don't force the knife; let the blades do the work.

EZ-Stick Pro:

Clean attachment points on the wall surface with Isopropyl alcohol (avoid household cleaners), wipe gently and let dry.  Separate the EZ-Stick Pro Tabs from each other.  Remove one of the paper release liners from the strip.  Apply the tabs on the rear of the panel near the outside edges, orient vertically for maximum holding strength.  Remove the second paper release liner from the backside of the tab, position the panel with the target location on the wall and press firmly to attach.  Use 4 tabs for a 2'x2' Studiofoam panel and 6 tabs for a 2'x4' panel.

Tubetak Pro Liquid Adhesive & Foamtak Spray Adhesive:

Both are contact adhesives, so wait a period of time after applying it to the back of the panel before trying to adhere the panel to the wall.

  • Tubetak Pro (caulk gun required) typically works better if it is spread thin, use a putty knife if needed.  If the adhesive seems to take a while to dry (cure time can be dependent on humidity and other environmental factors), you may consider supporting the panel in place with a T-pin or finish nail.
  • If you are using Foamtak (US only), hold the can 12 to 18" away from the Studiofoam and shake the can from side to side to yield a spider web pattern.  For best results apply to both surfaces, allow 45 seconds to tack and then apply.  For a more temporary bond apply the Foamtak to one surface only.  Storing the Foamtak upside down between applications may allow a more consistent spray pattern.  You can use the Studiofoam carton as spray shields for a cleaner installation.  Stacking two Studiofoam cartons can provide a convenient work surface.

TEMP Tabs:

TEMP Tabs are a semi-permanent mounting kit that is a great way to temporarily install your Studiofoam.  Removing the tabs causes some minimal damage to walls that may require spot repairs.

Other Mounting Options:

  • T-Pins or Finish Nails can be used to tack the panels in place for a quick installation with minimal wall damage.  Sometimes larger nails or panel movement can cause the foam to tear, so this is usually best as a temporary installation method.
  • Studiofoam can be mounted to a backing (such as pegboard, Corex, cardboard, plastic, plywood, etc) before installing it on a wall.  This assembly allows for added durability when relocating/repurposing Studiofoam panels.


  • EZ-Stick Pro Tabs may not adhere well to some vinyl wallpapers.  Apply to surfaces above 50° F (10° C).  Adhesive could soften and lose adhesion above 105º F (40° C).  EZ-Stick Pro Tabs are considered permanent and will damage the wall surface when removed.
  • Both Tubetak Pro and Foamtak are considered permanent installations.  Removing a panel after the adhesive has cured can result in some damage to the Studiofoam and the mounting surface.  Auralex is not responsible for any damage to walls, floors, ceiling or the overall structure that occurs doing installation or removal of our products.  Try using a flat edge knife to carefully scrape the panel away from the wall to minimize tearing, and then use a citrus-based adhesive remover.
Shipping & Returns

Shipping and Return information is specific to this product page only (not for other products on our site).

  • Shipping:
    • Product usually ships within 4-7 days.
    • FREE SHIPPING on this product - Applies to orders shipped within the USA (excluding Alaska and Hawaii).
  • Returns:
    • We will accept returns up until 60 days from the date of purchase.  The boxes need to be unopened with no damage and a 25% restocking fee will be charged.
    • Please call or email us to receive an RMA number before returning. No returns will be processed without an RMA number.  
    • We will provide you with a shipping address when giving you an RMA number.
    • Return shipping is customer's responsibility. 
    • If you are shipping via USPS (not recommended) do NOT require signature as we will not be able to pick up your package from local post office facility.
Send to friend
: *
: *
: *
Product reviews are only available to verified buyers of this product. To leave a review, please refer to the product review email we sent you.

Not yet rated. Be the first to Write a Review

Recently Viewed

Customers Questions and Answers