Noise Damping Pipe and Duct Wrap

Details

SKU IVQ1010LAG

Weight 0.00 lbs

MLV Thickness

Fiberglass Density/Size

Price:

$413.40

Options

Quantity

Ask a question about this product

TM Soundproofing's Pipe and Duct Wrap / Laggings are multi-purpose composite materials manufactured and sold in 1lb X 100 sq ft rolls or 2lbs X 60 sq ft rolls. These products are available in several variations to solve your specific application requirements. The products feature a faced flexible acoustic mass barrier bonded to an insulating acoustic fiberglass decoupling layer. The decoupling layer is bonded to the inside of the acoustic barrier to provide thermal and vibration insulation, it is available in 1" or 2" thicknesses.

Please contact us for special pricing when ordering more than one roll. 845-352-3200

Application:

Pipes and Ducts
Wrap noisy pipes, waste pipes, ducts, valves and fan housings to prevent break through noise from transmitting through the wall of the pipe or duct: measure the exterior diameter, add about 5" for overlap, cut that length from the 4' wide roll, wrap the lagging on, tape closed with duct or mylar tape.

Suspended Ceilings
For privacy enhancement of acoustic suspended ceilings to prevent break through noise from transmitting through to the space above. Simply lay the lagging sheet on top of your ceiling panels* with the fiberglass side down. Precut 2'X4' panels are available to fit your ceiling grid for a fee.* Note: the installer must assess suitability of the ceiling grid and supports for adding additional weight.

Interior Walls of Home & Apartment HVAC Closets
Apply the lagging with fender washers and screws to the interior walls of apartment HVAC closets. To increase structureborne vibration dampening: substitute peel-n'-stick pressure sensitive adhesive to achieve full surface contact of the acoustic mass layer to your interior walls and then use the fender washers with screws. (Ask us about aspiration baffles for interior HVAC to achieve a tight, satisfactory job.)

Interior Machine Cabinets
Substitute peel-n'-stick pressure sensitive adhesive to achieve full surface contact of the acoustic mass layer to your machine cabinet interior surfaces. Die and CNC cutting is available for production orders.